logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
#40871 2006-04-20 09:28
Joined: Apr 2004
Posts: 2,492
Senior Shouting Officer
Senior Shouting Officer
Joined: Apr 2004
Posts: 2,492
I think I would set may front mains to small as well for cinema. You've got two competent subs - make them work hard! wink

Cliff


Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
#40872 2006-04-20 19:30
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
Yes, maybe all speakers set to small - but the crossover set pretty low? My Bc Acoustique fronts aren't bad at playing bass either...


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
#40873 2006-04-20 21:33
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
...and now my Velodyne will get even better, the software version 2.2.0 was just released and among other things will improve the bass extension (more low bass!) smile


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
#40874 2006-04-27 15:08
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
I would really like a Bass Management option for two subs, where the bass from all small speakers is "collected" together and sent to both subs - just like with the LFE...


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
#40875 2006-04-28 10:02
Joined: Jun 2006
Posts: 1,653
Likes: 1
Working on the ultimate question
Working on the ultimate question
Joined: Jun 2006
Posts: 1,653
Likes: 1
You need a TacT TCS2 then wink

You can mix any information from any speaker into any other giving complete control over the mix. This is one of the reasons I gave up my 861 for the TCS2.

Mark

#40876 2006-04-28 14:37
Joined: Jun 2004
Posts: 117
Hitchhiker
Hitchhiker
Offline
Joined: Jun 2004
Posts: 117
I suppose you can set the main to large and sub to 0. In a 5.0 system with center and surround set to small the bass will be directed to the mains.
But then you need an electronic crossover to seperate the subs or if they are already built in and maybe a separate power amp for the mainchannel.
I use it myself and it gives me maximum performance in 2 ch also.
Good luck

#40877 2006-04-28 18:36
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
Not much use in having two subwoofers and running the system at 5.0...?

I will put the DD-12 as front sub instead, the D1500 at the rear. Both will play LFE, but to "Velofyne-calibrate" that I need to make a DTS-CD, DVD or DVD-A with the Velodyne sweep in both the two front channels and the LFE. Then calibration can be done also using Trifield and other DSP modes giving sounds in all channels. What's the use for calibration of "movie subs" if the calibration routine (for Velodyne) implies a 2.1 system?


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
#40878 2006-04-28 19:10
Joined: Apr 2004
Posts: 2,492
Senior Shouting Officer
Senior Shouting Officer
Joined: Apr 2004
Posts: 2,492
Is daisy-chaining the subs an option as has been suggested in other threads?

Cliff


Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
#40879 2006-04-28 19:38
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
No, unfortunately not. If it had been a possible solution I would do it since it would be a good solution for my room and equipment - but the D1500 is a digital DSP sub that should have a 75 ohm koax as other Meridian speakers, the DD-12 (though being "digital on the inside") should be connected through standard analogue sub cable.

On the other hand, when I think about it, if the subs were of same type so they would be daisy-chainable I would instead connect them as a stereo sub pair...

Anyone who wants to donate some money for a good cause (me buying another DD-12)? If I get enough the best donator will recieve a D1500 in good condition. smile


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
Page 2 of 2 1 2

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
0 members (), 852 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
HugoF 10
Gemeni 9
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,254
Posts297,472
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.13 Page Time: 0.039s Queries: 32 (0.024s) Memory: 0.6628 MB (Peak: 0.7454 MB) Data Comp: Off Server Time: 2026-11-20 00:16:12 UTC
Valid HTML 5 and Valid CSS