|
|
Joined: Mar 2004
Posts: 383 Likes: 35
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2004
Posts: 383 Likes: 35 |
My Device Manager shows:
218 v1.1, build 271 251 v1.1, build 271 ID41 v1.1, build 271
Is that not the latest version?
Last edited by Gemeni; 2026-09-14 20:26.
TV room: 861v8, 800v4, UHD722,Front 2xDSP7200SE, DSP7200HCSE, Side DSP5200, Rear DSP33, DSW, (DD 15 Sub), Roon Rock NUC, QNAP NAS, Chromecast Ultra, Apple TV, Oppo BDP-105D, Pro-ject Pre box S2 digital, Philips Pronto remotes, Supra LoRad Power. Office: 800v3, MS200, DSP3100 Basement: MS600, 502, 557, Dynaudio 52se, Dynaudio Sub 250
|
|
|
|
|
Joined: Apr 2017
Posts: 90 Likes: 18
Hitchhiker
|
|
Hitchhiker
Joined: Apr 2017
Posts: 90 Likes: 18 |
v65 brings build 272 as the newest
808v6, 818.3, G65, G61RSL, G91DH, G08, G98DH, 500v3, 504, 218-LPS, 218, 210, MS200 8000uSE, 5200SE, 5200HSE, DSP5200 (nonSL~fully rebuilt w/ Excel tweeters), DSP3300x2, DSW.2 HD621, Pair of Revivers, AC12
|
|
|
|
|
Joined: Mar 2004
Posts: 383 Likes: 35
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2004
Posts: 383 Likes: 35 |
OK, I just noticed that my version of Meridian Device Manager was .64. How do I get hold of version .65?
TV room: 861v8, 800v4, UHD722,Front 2xDSP7200SE, DSP7200HCSE, Side DSP5200, Rear DSP33, DSW, (DD 15 Sub), Roon Rock NUC, QNAP NAS, Chromecast Ultra, Apple TV, Oppo BDP-105D, Pro-ject Pre box S2 digital, Philips Pronto remotes, Supra LoRad Power. Office: 800v3, MS200, DSP3100 Basement: MS600, 502, 557, Dynaudio 52se, Dynaudio Sub 250
|
|
|
|
|
Joined: Mar 2004
Posts: 383 Likes: 35
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2004
Posts: 383 Likes: 35 |
I found it, saw the link further up in this thread.
TV room: 861v8, 800v4, UHD722,Front 2xDSP7200SE, DSP7200HCSE, Side DSP5200, Rear DSP33, DSW, (DD 15 Sub), Roon Rock NUC, QNAP NAS, Chromecast Ultra, Apple TV, Oppo BDP-105D, Pro-ject Pre box S2 digital, Philips Pronto remotes, Supra LoRad Power. Office: 800v3, MS200, DSP3100 Basement: MS600, 502, 557, Dynaudio 52se, Dynaudio Sub 250
|
|
|
|
|
Joined: Oct 2014
Posts: 276 Likes: 4
Hitchhiker
|
|
Hitchhiker
Joined: Oct 2014
Posts: 276 Likes: 4 |
If stuck on the Preparing for Update screen, also check your network adaptors. I have a VirtualBox installed which installs a virtual network adaptor. In my case the updater was trying to use this, setting it to disabled resolved my issues.
Might be an issue for devices where there are VPN, secondary adaptors etc.
Check in Network and Internet > Advanced Network Settings.
Lounge: DSP33's, MS200, QNAP (Storage and Core), G68D, HD421 Family Room: DSP5000 Kitchen: F80 Portable: Explorer2
|
|
|
|
|
Joined: Jan 2004
Posts: 1,403 Likes: 26
Working on the ultimate question
|
|
Working on the ultimate question
Joined: Jan 2004
Posts: 1,403 Likes: 26 |
https://www.koneav.com/support/down...mp;sk=&sw=&offset=&category=Hi Does anyone have an updated, working link the the Meridian Device Manager? I tried to use the above link previously suggested but it just goes round and round without opening. Thanks in adance for all help. Regards
Cinema: DSP750 x3, DSP3300 x 4, DSW.2 x 3, Trinnov A32, 271, Oppo 203, Toshiba HD-DVD, SKY Puck, Sony XW7000 PJ, Screen Research AT, Kaleidescape 4K 30TB Lounge: 861v8, 808v6, UHD722, DSP8000SEPP, DSP7200HCSE, DSP3300, DSW x 2, 504, C15, Sony UBP-X800, SKY Puck Bedroom: DSP5200SEHC, G65, UHD722, G08, DSW, M6, C15, 210, SKY Puck Spare:
|
|
|
|
|
Joined: Jan 2004
Posts: 1,403 Likes: 26
Working on the ultimate question
|
|
Working on the ultimate question
Joined: Jan 2004
Posts: 1,403 Likes: 26 |
Found the device manager now.
It has found my 271 but all I am getting is the following message:
Unable to load settings. Please check your network configuration and try again.
I'm not a techy geek, it is clearly listing my device but won't go any further.
What am I missing? Does my 271 need to be turned on, currently in standby?
Cinema: DSP750 x3, DSP3300 x 4, DSW.2 x 3, Trinnov A32, 271, Oppo 203, Toshiba HD-DVD, SKY Puck, Sony XW7000 PJ, Screen Research AT, Kaleidescape 4K 30TB Lounge: 861v8, 808v6, UHD722, DSP8000SEPP, DSP7200HCSE, DSP3300, DSW x 2, 504, C15, Sony UBP-X800, SKY Puck Bedroom: DSP5200SEHC, G65, UHD722, G08, DSW, M6, C15, 210, SKY Puck Spare:
|
|
|
|
|
Joined: Aug 2025
Posts: 26 Likes: 1
Harmless
|
|
Harmless
Joined: Aug 2025
Posts: 26 Likes: 1 |
Connect your 271 directly to your pc or laptop. Set a static IP in your pc. Run mdm and it should work.
|
|
|
|
|
Joined: Jan 2004
Posts: 1,403 Likes: 26
Working on the ultimate question
|
|
Working on the ultimate question
Joined: Jan 2004
Posts: 1,403 Likes: 26 |
What type of lead do I need to connect directly to the 271?
Cinema: DSP750 x3, DSP3300 x 4, DSW.2 x 3, Trinnov A32, 271, Oppo 203, Toshiba HD-DVD, SKY Puck, Sony XW7000 PJ, Screen Research AT, Kaleidescape 4K 30TB Lounge: 861v8, 808v6, UHD722, DSP8000SEPP, DSP7200HCSE, DSP3300, DSW x 2, 504, C15, Sony UBP-X800, SKY Puck Bedroom: DSP5200SEHC, G65, UHD722, G08, DSW, M6, C15, 210, SKY Puck Spare:
|
|
|
|
Forums18
Topics31,253
Posts297,452
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|