My choice isn't just about the bass...
If human hearing caps out at around 15 kHz to 20 kHz (and often closer to 12 kHz to 14 kHz for adults in their 60s), why should anyone care if a Focal Beryllium tweeter goes all the way up to 40 kHz, while the KEF's aluminum tweeter tops out around 28 kHz?
You are not listening to ultrasound frequencies. You cannot hear a 30 kHz tone.
The value of that ultra-high frequency spec has nothing to do with hearing sound in the ultrasonic spectrum. Instead, it is entirely about how the tweeter behaves inside the human audible range (20 Hz−20 kHz).
Here is the mechanical and mathematical physics of why a 40 kHz extension makes a massive difference to what you actually hear.
1. Moving the ‘Break-Up Mode’ Far Away From Your Ears
Every physical speaker diaphragm (whether made of paper, aluminum, or beryllium) is stiff, but it is not infinitely rigid. As a tweeter vibrates back and forth tens of thousands of times per second, there comes a point where the material can no longer move as a single, perfect unit.
Instead, the metal dome begins to bend, flex, and twist out of shape. This mechanical failure is called Tweeter Break-Up Mode.
When a tweeter hits its break-up frequency:
* It produces a massive spike in harsh metallic resonance.
* It introduces severe phase distortion and ringing.
* Even worse, this mechanical violence creates Intermodulation Distortion (IMD), which bleeds downward into the lower frequencies (2 kHz−10 kHz) that your ears are highly sensitive to - making sibilance ('s' and 't' sounds) sound sharp, brittle, and fatiguing.
The Material Difference:
Aluminum (KEF): Aluminum is relatively light, but it is not extremely stiff. An aluminum dome typically reaches its mechanical break-up point around 22 kHz to 28 kHz. Because 22 kHz is right on the edge of human hearing, the 'slope' or 'tail' of that harsh mechanical ringing bleeds directly down into the 10 kHz−15 kHz range. This can add a subtle 'metallic glaze' or harshness to high-energy sounds like cymbals, glass shattering, or high-frequency film effects.
Pure Beryllium (Focal): Beryllium is 7 times stiffer than steel and 2.5 times lighter than aluminum. Because it is ridiculously stiff and light, its mechanical break-up mode doesn't happen until an astounding 40 kHz+.
By pushing the mechanical distortion point all the way up to 40 kHz, the Focal tweeter operates as a perfectly rigid, distortion-free piston throughout the entire audible spectrum (20 Hz−20 kHz). You aren't listening to 40 kHz; you are enjoying a 12 kHz tone that is completely free from the mechanical ringing of a flexed dome.
2. Phase Alignment & Impulse Response (Time Domain)
Sound isn't just about frequency (pitch); it is heavily about time (impulse response).
When a film sound effect occurs - like a gunshot, a raindrop hitting a leaf, or a lapel microphone catching a spoken word - it is a sudden, sharp transient peak.
If a tweeter has a frequency limit near the audible boundary (e.g., 22 kHz), the electrical filters and natural physical roll-off introduce phase lag (group delay) at frequencies well below that limit. The 12 kHz harmonics end up arriving at your ear a microsecond later than the 2 kHz fundamental tone.
Your brain uses these microsecond arrival times to locate where a sound is coming from in 3D space.
Because the Focal's Beryllium tweeter extends out to 40 kHz, its phase response across the 1 kHz−15 kHz band is flat and phase-linear. The harmonics and the fundamentals arrive at your ears at the same microsecond. This gives the Focal startling transient speed and spatial imaging - the sound objects overhead don't just sound like ‘a noise from a speaker’, they sound like pinpoint objects floating in mid-air.
3. Why This Matters Alongside Your Meridian DSP5200SEs
This is the most critical point for your specific system: Timbre Matching and Phase Speed.
Your Meridian DSP5200SEs are Special Edition, active digital speakers. They do not use standard passive crossovers or conventional slow tweeters:
They feature custom, ultra-light Beryllium dome tweeters or clamp-loaded horn/short-coil drivers driven directly by dedicated digital amplifiers.
The Meridian digital crossover is phase-linear in the time domain, giving the DSP5200SEs legendary transient speed, control, and zero top-end smear.
The Acoustic Handshake:
If an Atmos sound object (e.g., a helicopter or bullet) pans from your Meridian DSP5200SE front stage up into the ceiling:
If using a slower, conventional tweeter, overhead: As the sound transitions from the Meridian to the ceiling, your brain will instantly spot the change in texture. The object will sound crisp and fast at the front, but turn slightly ‘thicker, warmer, or harsher’ as it moves overhead. The seamlessly unified acoustic bubble is broken.
Using the Focal 1000 ICA6 overhead: Because the Focal uses a matching Pure Beryllium inverted dome with similar stiffness, speed, and distortion-free piston action, the acoustic signature of the overhead speaker completely mirrors the speed and texture of your Meridian front stage.
The sound object doesn't feel like it is jumping from a ‘Meridian speaker’ to a ‘ceiling speaker’ - it feels like a single, continuous, ultra-resolving sonic canvas stretching from floor to ceiling.
Target Curve Optimization (Timbre Matching)
Meridian speakers have a legendary sound signature - characterized by zero high-frequency harshness, extreme transient speed, and a smooth, uncoloured midrange. Off-the-shelf architectural speakers often sound overly bright by comparison, which ruins the illusion when a sound pans from a main speaker to an overhead speaker.
Configure the following Target Curve in your Trinnov Altitude specifically for the Focal Overhead Channels:
* 20 Hz to 200 Hz: Keep flat with a gentle +1.5 dB room-gain curve matching the behavior of your Meridian mains (this prevents a 'thin' sounding ceiling layer).
* 200 Hz to 2,000 Hz: Linear, flat response (0 dB deviation).
* 2,000 Hz to 10,000 Hz: Apply a steady downward tilt of -0.5 dB per octave.
* 10,000 Hz to 20,000 Hz: Increase the roll-off to -1.5 dB per octave.
Why this works: The Focal 1000 ICA6's Pure Beryllium tweeter is incredibly fast but physically distinct from the Meridian digital crossover network. Forcing this target curve smoothly relaxes the upper-mid/lower-treble bite of the Focal, allowing it to seamlessly match the signature warmth and authority of your Meridian bed channels.