Finally, my miniDSP PocketADCs arrived, and I was able to test them in my home theater, replacing the Meridian 218s I had been using to take the analog output from my processor and feed my legacy Meridian speakers.

My first impression of the PocketADCs was excellent. They are completely silent (no audible noise from the speakers), and the sound quality seems very similar to what I was getting with the Meridian 218s.

Considering the price, I think this is one of the most affordable ways to integrate Meridian speakers with coaxial digital inputs into a modern AV processor that isn’t made by Meridian. The best part is that, despite the low cost, the audio quality remains excellent.

For speaker control, I currently have two options. I can use one speaker as the master and control the system with the Meridian remote, or I can use an iPhone app that I developed to control the speakers via RS232 commands. The app lets me create presets specifically for processor use, so the speakers automatically switch to volume 82, reset the tone controls to flat, and restore the axis setting to zero.

For now, I only bought one pair of PocketADCs, so I’m still using a Meridian 218 for my surround speakers. However, I’m already planning to buy one or two more PocketADCs to simplify my setup even further.

The only downside is that the device provides optical and SPDIF outputs only. However, it should be possible to convert SPDIF to AES/EBU, which is the format used by SpeakerLink.

Although the miniDSP operates at 24-bit resolution, it should work perfectly well with older Meridian speakers that are limited to 16/18-bit and 48 kHz. I say this because my Bluesound Vault 2 also outputs 24-bit audio, and it has always worked flawlessly with my 18-bit Meridian speakers. The only exception I’ve noticed is that, on a few tracks, the 24-bit signal occasionally causes the yellow indicator on the speaker display to flash, indicating that the input is approaching clipping.

My front LCR speakers support 24-bit/96 kHz, and the PocketADC can be configured to output audio in that format (its maximum output sample rate is 192 kHz).

I’ll continue experimenting with the PocketADCs, and if I discover anything interesting, I’ll post a follow-up here.