Apologies, it seems I've been a bit quiet recently. I have just ordered a 2TB SanDisk SATA SSD, which should fit the 2.5-inch drive bracket. The drive is due to arrive this Thursday, and my plan is to clone the existing mechanical HDD to the SSD. As Steve advised, I will keep the original HDD as a backup.

In the meantime, I am not using the MC200, as the current HDD is likely between 10 and 15 years old. Given its age, there is a risk of failure, which could result in the loss of both the operating system and the music library.

I have already tested the MC200 using my laptop via its IP address, and everything appears to be working correctly. I have also used an old iPad that I originally bought for the children nearly 15 years ago, and I am able to access and play all of the music that came with the MC200 without any issues.

JorgeQ, once I have installed the cloned SSD in the MC200, I will check the software version and review any configurations that may have been set up by the previous owner, which are currently allowing me to use the unit.

I believe the iPad is a very early model and has not received updates for many years, as Apple no longer supports it.


DSP5200.2, AC200, MC200, MSR+, laptop (VLC, CD's, FLAC and WAV Lossless)