|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
I have a 210 that I haven’t used in awhile and hooked it back up only to find I can’t get it to check for updates (via the MControl app) or get sound out of it.
I have spoken to Bruce about it and he seems to think I need to send it in for a repair.
The identification states main version 01.00.01 (not sure if that is the firmware version).
Before I do that I wanted to see if anyone has any ideas on what I might try.
Things I have tried:
When I power it up the blue “ Net” light is solid and my MControl app sees it.
The light turns solid white when I play a source ( Roon).
I have it hard wired to my network. When I “ check for updates “ in the MControl app it states “Error- check the internet connection “
I have tried rebooting, unplugging etc.
I tried hooking it up via the MasterSL out to SL in on the 271.
I also tried to go to my 218 SL in.
In MControl Audio setup I have tried SL and network.
I use Roon as a source and I have enabled the 210 and I see the audio bars moving on the Roon display.
I have tried all the different inputs on the remote.
I went into the 271 audio setup on the MControl app and tried SL and network and last valid.
All the above produces no sound.
The unit is not under warranty but I have rarely used it so I am open to suggestions before having to send it in to have it checked.
Thanks in advance.
Joe
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Feb 2002
Posts: 8,812 Likes: 87
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Feb 2002
Posts: 8,812 Likes: 87 |
Try running the Control app with admin rights.
Rgds,
Nick
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
I tried running the Control app on my iPad and also my PC
I need to check on the admin of my PC and try again
Does anyone know what the current firmware is ?
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Sep 2011
Posts: 187 Likes: 2
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2011
Posts: 187 Likes: 2 |
I have the same issue with the 210 regarding the firmware upgrade error and version but otherwise my 210 is working normally.
Last edited by Pieter dVR; 2026-06-16 16:28.
living: 218, 2x DSP5200SE, 1x DSP3300
study: 218, 2x DSP3200
sleeping: 218
spare: HD621, AC11, DSP33C
|
|
|
|
|
Joined: Nov 2009
Posts: 3,856 Likes: 374
Meridian Partner Vogon Civil Servant
|
|
Meridian Partner Vogon Civil Servant
Joined: Nov 2009
Posts: 3,856 Likes: 374 |
Make sure that you are connected to a wired network. Then ensure that you are communicating with the 210 over Bluetooth, then initiate the update.
www.cmbintegrations.comOne step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
I haven’t tried pairing my iPad via Bluetooth - Thanks for the suggestion Bruce.
What is the current software version?
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Sep 2011
Posts: 187 Likes: 2
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2011
Posts: 187 Likes: 2 |
Can anyone tell me what the current version is?
I'm still on:
Main version: 01.00.01
Net version: 03.06.90
BT version: 7.2
Thanks
living: 218, 2x DSP5200SE, 1x DSP3300
study: 218, 2x DSP3200
sleeping: 218
spare: HD621, AC11, DSP33C
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
My 210 states the same.
When I check for updates it should say “ Up to Date” but it says error instead.
The bigger issue is I haven’t been able to get it to play anything ( produce any sound) but I haven’t had time to try pairing it with Bluetooth ( will have some time in the next 2-3 days).
I only tried using my Roon app on my iPad via the Trinnov. My 218 works fine doing this.
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Nov 2009
Posts: 3,856 Likes: 374
Meridian Partner Vogon Civil Servant
|
|
Meridian Partner Vogon Civil Servant
Joined: Nov 2009
Posts: 3,856 Likes: 374 |
www.cmbintegrations.comOne step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
I’ve had more time to troubleshoot the firmware update issue.
I’ve tried connecting to the 210 via Bluetooth with both my iPad and PC.
I’ve used both WiFi and an Ethernet connection on my PC.
Interestingly the iPad Control app recognizes the 210 and connects but the PC Control app doesn’t.
When I manually try to add the 210 to the PC Control app it lists devices to add and a 210 isn’t even offered in the menu.
The app version is the same on the iPad and PC - 2.2 build 267.
I listed it as a 218 instead (closest component to it as listed) and put in the IP address and it still doesn’t see it (or connect) even though in the added component section I see it listed.
The 210 lights on the front respond correctly ( solid white light upon a Bluetooth connection and solid blue light on Network Connection which turns white when I try a source on the iPad Control app.
Has anyone used an iPad to update their 210?
I am thinking a PC may work if I can get the app to see the 210.
I haven’t retried playing any music yet.
Not sure what else to try before sending it in to the repair shop.
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
Update: I finally got it to play music.
I used SL master out on the 210 to SL in on the 271 and used the “218” button on my remote which is a SL input.
So now the only issue is the firmware update.
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
Question:
Does the 210 need to in standby (blue light on) or on ( white light) in order to do automatic updates?
Bruce mentioned Bluetooth on but I think that would be for a manual update.
I thought about trying that for a firmware update now that it is playing music.
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
0 members (),
102
guests, and
0
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,176
Posts297,065
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
