As far as I am aware, bad caps on boards of G series for example, could also take down a switched mode power supply quickly to it's death.
Perhaps also a bad stock switched mode PSU can also cause damage to caps on G series boards..

after replacing a G series PSU, I would highly recommend to check for bad caps on the cards inside.
this document, and this one could help diagnose/repair.

Also this document could be handy I think.

Hope this info helps..


#1 568.2mm, HD621, G91DH, 513, 511, DSP3100 , DSP33C , DSP33, 2x MJ Pro 50 MKI, M1500
#2 G68J, HD621, DSP3100, DSP5200HC, DSP33, 3x MJ Pro 50 MKII, MS200, SB Touch, Vertex 2
#3 G61rsl, HD621, 596P, DSP7000, DSP5500HC, DSP33, 2x MJ Pro 50 MKII, M1500

Applied mods: NOS-SRx Filter by Mr. Apodizer
Mr. Apodizer Digi box