just finished re-capping one of my non SL 5200's, my boards looked identical. Both mine are cooked in the same way, i suspect not having any heat control on the LM337/317 regulators may be the main problem; Reducing lifespan -> higher current draw -> more heat in the resistors. Looking at heatsinking and or replacing mine: lots of idle heat. Outside of that the re-capped speaker with new ferro fluid in the tweeter sounds fantastic. almost all the FW caps were reading 50% or less (tested at 120hz), res/filter caps all tested fine. Opted for UKA instead of UFW caps, for the 105c rating. build date on my speakers is 08, with most of the caps from around then by the date codes.
808v6, 818.3, G65, G61RSL, G91DH, G08, G98DH, 500v3, 504, 218-LPS, 218, 210, MS200 8000uSE, 5200SE, 5200HSE, DSP5200 (nonSL~fully rebuilt w/ Excel tweeters), DSP3300x2, DSW.2 HD621, Pair of Revivers, AC12
|