logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: Aug 2017
Posts: 88
Likes: 3
Hitchhiker
Hitchhiker
Offline
Joined: Aug 2017
Posts: 88
Likes: 3
hi steve when putting the cards back in should i follow the procudure in this tech note


Mac -> 818v3 -> 5200SE / Mac -> Director -> 551 -> Epos K2
Joined: May 2005
Posts: 839
Likes: 161
Paranoid android
Paranoid android
Joined: May 2005
Posts: 839
Likes: 161
Hi Andy,

There's no harm in following the tech note. I always replace the capacitors on the backplane and check for any other suspects on all the cards (different models of G68 have different card combinations).

At least if they've all been replaced, the unit should work and last for another 10-15 years!

Cheers,

Steve


Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200.2HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5200HC, DSP33
Spare: MCD, 100 Series, 200 Series, 500 Series, F80s, C15s.
Joined: Aug 2017
Posts: 88
Likes: 3
Hitchhiker
Hitchhiker
Offline
Joined: Aug 2017
Posts: 88
Likes: 3
On inspection I also found this capicator looking suspicious - maybe not related to the humming output - but it might be a good idea to replace it

I tried to get the board out but it seems attaced to the sceen and the volume knob, is there an easy way to get the board out

[Linked Image]


Mac -> 818v3 -> 5200SE / Mac -> Director -> 551 -> Epos K2
Joined: May 2005
Posts: 839
Likes: 161
Paranoid android
Paranoid android
Joined: May 2005
Posts: 839
Likes: 161
Ah... the usual bulging capacitor on the display board! It shouldn't be related to the hum but ideally should be replaced.

As it is almost impossible to get to the underside of the board (unless you fancy de-soldering the delicate vacuum display), I would leave the display in place, carefully cut the faulty capacitor off the board, de-solder the legs, and then insert a replacement capacitor slightly proud of the PCB (so you have enough room to solder the legs on the component side).

If you need to remove the display, there is a nut and washer behind the volume knob that needs to be undone. Be careful as it is also glued via a sticky pad to the front glass!

Good luck,

Steve


Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200.2HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5200HC, DSP33
Spare: MCD, 100 Series, 200 Series, 500 Series, F80s, C15s.
Page 2 of 2 1 2

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
4 members (Whitecot, bxd, Mr_Sukebe, JohnBoy1), 192 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
HugoF 10
Gemeni 9
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,254
Posts297,465
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.021s Queries: 24 (0.015s) Memory: 0.6427 MB (Peak: 0.6977 MB) Data Comp: Off Server Time: 2026-11-19 15:51:52 UTC
Valid HTML 5 and Valid CSS