Hi Andy,
Be careful when opening the G68.
You'll need to go in through the top to allow removal of the cards.
Undo the four bolts on the top outer plate, then remove the inner plate with the glass top (another dozen screws!)
Remove all the screws on the last backplate (note the position of each screw/bolt - they are different!)
Some units have metal rods that keep the cards as a stack - these will need to be removed from the top. Some units have clips that keep the FICL and DSP cards (hidden in the middle of the end stack) in place.
You will probably find, on removing the cards, that the edge connectors have oxidised - they will need cleaning, along with the connectors on the backplane - grab a can of deoxit...
Check for dry joints around the faulty phono socket - sounds like the ground is not making good contact - check with a multimeter (if you have one)
Good luck,
Steve
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200.2HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80 Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2 Son's system: 861v4, HD621, DSP6000.2, DSP5200HC, DSP33 Spare: MCD, 100 Series, 200 Series, 500 Series, F80s, C15s.
|