I wonder if you having had a processor in the MConfig setup somehow configure the HD621 so that the HD621 expects comms input?

O/P, try inserting a surround controller in MConfig between the HD621 and the DSPs, that should visually give you a comms connection via the controller to the DSPs. Store that to the HD621 without removing the surround controller in MConfig.

If this gets comms working, you could then try setting the HD621 to 2-channel.

If that doesn’t work, perhaps the devil is in the detail of Gianni’s config in the DSPs themselves?

The last possibility is that your HD621 comms board is broken in some fashion…


HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES
2-Channel: Oppo BDP-105, TEAC VRDS-7/Trichord Clock 3/PSU, 551, Quad 303, Harbeth Compact 7ES-3, Kimber cables, Russ Andrews mains and supports.
Previous Meridian: 5000C, 5200SL, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 502