Originally Posted by swpnt
Take pictures so you can make sure the connectors go back in the correct ways.

The top panel connects to the lower panel via several connectors - two grey 4-wire cables, one grey 3-wire cable, and two yellow/green three-way cables. Again, take pictures of how things are connected.

This can’t be emphasised enough. The connectors are not idiot proof and can be plugged in either way. If you plug them in the wrong way, you will likely do damage. As Steve says, take pics, or I would even mark them with a coloured marker, across one side of the connectors, so the marks have to line up when you plug them in again… Anything like that which helps you get it right when you put them back.

HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES
2-Channel: Oppo BDP-105, TEAC VRDS-7/Trichord Clock 3/PSU, 551, Quad 303, Harbeth Compact 7ES-3, Kimber cables, Russ Andrews mains and supports.
Previous Meridian: 5000C, 5200SL, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 502