Originally Posted by Vorticity
Each transition causes a relay in the 818 to open/close causing an audible click. Very distracting.
If you aren't using the Analogue outputs from the 818v3 at all (So no headphone amp connected for example) you can set the relays to remain in their Analogue Output Muted state.
Under the flap on the 818 use < and > to navigate to 'Relay Mute Normal'
Then use v and ^ to select 'Relay Mute Silent'
This will stop the relay clicking, and disable the analogue outputs.
Rick

Audio Images, 284 Glossop Road, Sheffield, England. Tel: 0114 273 7893
Website: www.audio-images.co.uk Email: Click here to email Rick