Hi Jorge,
It is quite common when the PSUs fail within G-series, that a number of other cards are taken out. It could have been the case with your unit and a poor repair effected.
The components replaced look to only be within the analogue output section of the card, so there must be a more fundamental issue with the G68. Usually, the FICL card fails - this will result in no digital output (you may still get on zone 2 as that is effectively a direct 'tape out') - a good indicator of this is if the volume control is 'laggy' when a digital source is selected.
Clean and re-seat all cards and try again. Check the capacitors on the backplane - they'll probably be bulging (or should have been replaced) - there is definitely an 'art' to keeping these units running!
Spare cards may still be available, but will probably cost more than the unit cost 2nd hand...
Good luck - you'll need it!
Cheers,
Steve
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200.2HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80 Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2 Son's system: 861v4, HD621, DSP6000.2, DSP5200HC, DSP33 Spare: MCD, 100 Series, 200 Series, 500 Series, F80s, C15s.
|