Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Streaming Hardware with Roon Application MS600 doesn't wake up DSP system versus MS200 does

I use Roon with ROCK on a NUC. My source was a MS200 connected to G65 (then DSP speakers).

It would wake up the Meridian system (G65 and DSP speakers) every time I press play on the iPhone Roon app, when the system was on sleep.

But with my MS600 instead of the M200 as the source, it does not. Has anyone experienced this, and is there a remedy?

Thanks

Are they running similar versions of the firmware?

Thanks Bruce. This is what I found:

MS600
Software version: 1.2, build 169
Co-processor version: 0.5.28
Hardware version: 2.5

MS200
Software version: 1.0, build 169
Co-processor version: 1.3.7
Hardware version: 2.1

I compared side by side the setup of the MS200 and the MS600.
On the MS600, CD and SLS source configuration were set as both 4C

I changed it to match the MS200: CD = 1C and SLS = 4C

MS600 now wakes up the system from the Roon app on my phone.

Cheers

Excellent.