When I take the 861 out of standby using the front panel, the volume showing on the front 5200s and the 861 is the same, and smoothly scrolls up and down. The 5200HC, however, never came out of standby mode

When everything is in standby and I select "TV" from the MSR+, all three speakers and the 861 come out of standby, but when pressing the power up/down buttons on the front of the 861, only the 861 and 5200 fronts change. The 5200HC does not change value at all!

All speakers are connected using CAT5 SpeakerLink (there is no separate no Meridian comms).

I have tried typing the 861 to type 2 and starting again using the configurator, but the same issue persists.

Dennis
861v8, 5200, 5200HCSE, 3200, DSW.2, HD621, Vertex2