Just finished doing a full capacitor refresh/service on a DSP5200 electronics panel (amp and DSP boards) which I believe to be a 2005 model. There has been a lot of discussion with respect to DSP5000, but my first impression is that early DSP5200 could benefit from a capacitor refresh/service. I've got two more speakers to do, so will report back my findings
Brief observations:
1) There was heat damage to the PCB behind the power resistors, but no damage to the resistors or the PCB tracks. See the black discolouration on the PCB in the image (not the shadow).
![[Linked Image]](gallery/16/full/2867.jpg)
2) There appears to be signs of heating to some of the smaller capacitors. The closer the power end of the board the more discolouration to the cases. This is likely to affect the component value although I have no way of measuring them to confirm. I have included new caps in the picture with the long leads, for a colour reference. All the caps in the picture were the same series and therefore the same colour when new.
![[Linked Image]](gallery/16/full/2868.jpg)
Image of the finished board.
![[Linked Image]](gallery/16/full/2869.jpg)