Removed the card and cleaned the contacts then re-seated the card. Firmware now loaded ok, at least no errors. Repeated twice with success.

When the unit is in standby and I press display I get the following after each press:

1) Micro G68 1.5 /4409
2) +AAC/Zone2 decoderr
3) DSP C00055/D840853
4) DSP E00011/F840853
5) S/N G68 102104
6) Meridian G68
7) blank
8) blank
9) blank
10) blank
11) blank
12) blank

The blanks don't seem right?

From the up loader program clicking identify returns:

Display 025
DSPC C00055
DSPD D84053
DSPE E00011
DSPF F84053
FIFO 1.5
Micro v4409
Serial Number 102104


Lounge: DSP5200, 518
Snug: DSP33 x 5, C61R, HD621
Office: M33