Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Streaming Sooloos (32 bit) and QNAP 4.3.3 (64 bit) [Resolved 64 bit released]

Thanks to the instructions provided, I updated my system today to version 2.535.

After a few reboots, I noticed in the messages on the C15 that I had more than one core enabled. The new QNAP Sooloos app defaults to having the core enabled, and I had previously enabled the core on the C15. I disabled the core on the C15 and rebooted.

Everything appeared to work, but the Audio Endpoint Zone for the C15 disappeared. Reverting back to having the core run on the C15 and disabled on the QNAP and the Zone reappeared. So it seems that the Zone is only enabled when running the core on the C15?

The other problem I encountered is the MS200 doesn't appear to want to connect. On power up both the center and right lights blink, and then the center light remains on and the right turns off. This should indicate normal operation? but the Zone is not available. Maybe a network problem? Will continue rebooting.