Hi Jason,
Originally Posted by Koputai
I've bought a NOS C10...
NOS, "New Old Stock"?
Originally Posted by Koputai
Is the inability to save channels to my library purely because I have no storage?
Most likely.
Originally Posted by Koputai
my Control:10 is running 2.394, I would have thought I would get a message to update the software, but that doesn't happen either. Could this also be because I have no storage attached?
The latest version was released back in April 2016 Sooloos Software V2.494 Release NotesThe Sooloos Core should be able to update itself with having storage Sooloos attached.

I suspect this device (being NOS) has not been registered with Meridian ... I suggest emailing Meridian Sooloos Support ... send them the serial number / MAC address of the device so they can add it onto their their servers.

Typically with the C10 connected the internet, it should connect to the Meridian servers and after a period of time the update will be pushed down to it automatically. Sometimes a reboot can help to give it a little prod.

Originally Posted by Koputai
I don't intend buying a Meridian storage device, but a QNAP server instead. Would this be a valid setup? ie. Control:10 + QNAP Server? The Control:10 would be control, source, and core.
Yes that's fine. Though the Sooloos Core can be run on the QNAP these days.

Once you're up and running, you might want to consider added say a MS200 which would bring a step-up in Audio Quality.

Regards,
Carl


861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)