I’m curious about Trinnov and Amethyst. I’ve migrated from an 861v4/DSP3100 system to Devialet D400/Raidho C1.1. Also have a pair of JL Audio F110’s. Devialet has no room correction (speaker correction it does), but it sounds glorious above 80hz in my room without it. The F110’s play great in this setup too, other than boominess I know is caused by room modes. My sources are Bryston BDP-2 streamer (digital), Oppo BDP-103D (digital), and VPI Scout turntable (analog). Assessing whether my best bet is to:
1) Leave front end alone and just apply room correction to analog subwoofer outs from Devialet to the F110’s (suffering A/D/A conversions, but maybe not audible at these frequencies?); or
2) Apply room correction to sources before digital in to the Devialet, correcting above 80Hz for the Raidho's too.
For option #1, the Trinnov seems like overkill. Thinking a DSpeaker Anti-Mode 2.0, a Velodyne SMS-1, or even re-purpose my 861v4 for MRC only on the subs. But option #2 with the Amethyst going into the Devialet is apparently getting extremely glowing reviews. And perfect bass I would pay almost anything to have in my room. Any thoughts on which way to go?