OK...I got the DSP5000C in yesterday. I set it up as a type 6, slave with the remote and have it daisey-chained from the "slave" DSP7000 (right channel).

Now come the questions...

I opened the configurator to add in this center channel to the controller and there is no "plain" DSP5000C in the speaker types. I made sure it is the latest release (3.07 Build 3557).

What it gives me is a choice of DSP5000HC or DSP5000VC...and asks if I want to put a 511 box in to simplify cabling. I said "yes"...

What's the difference between the HC and VC speakers?

I used the VC and it places a 511 box (with no connections) next to the G68D and connects the DSP5000 directly to the controller and won't allow any changes in the connections. I uploaded the config and get nothing from the center channel.

[Linked Image from i278.photobucket.com]

What I have on the DSP5000C display is this:

[Linked Image from i278.photobucket.com]

The system is in Theater mode...so I should be getting a feed to the front center...but am only getting the Left & Right channels.

So...any ideas where I'm out of sync? The cable is definitely a 5S going to the center channel.

G68D, DSP7000's, DSP5000C (18 bit), DSP420's, MF-1 Projector, Sony XBR-65 4K