I'm playing an album on my Office system. The PC, connected by ethernet over powerline, is doing other stuff (downloading large work-related documents, etc.). Another PC is uploading a CD to the store wirelessly. This is my normal operating profile.
I had three interrupts since loading the new software, causing the album being played to stop mid-track and to lose the album art showing top left.
This may be coincidence of course but I would be interested in other's experience of a similar use case.
Since experienced two more drop-outs, now running a back-up to see what happens...
Music played fine while the back-up was running. When the back-up finished, the music stopped AGAIN.
In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.
The problem continues here also after rebooting everything (PC, power ethernet points, router, internet connection, etc.) except the MD600 (which rebooted during the s/w update)
The problem appears to be on a 15 minute cycle, occasionally dropping a second time just after restarting.
Last edited by Gianni; 2015-03-0221:37. Reason: Spotted frequency
In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.
Regardless of whether music is playing, paused or stopped, the drop-outs are occuring regularly. This includes a brief network disconnect while I rebooted the router. I am guessing that my router (a BT HomeHub v4), being proprietary to my ISP, is different from ThePioneer's router so eliminating that as a possible cause.
Since last starting Control:PC I have had interrupts at 14:49, 15:04, 15:19, 15:34, 15:49 and 16:04 so the frequency is clear.
I think this is worth bringing to the attention of Meridian via a PP unless the mothership wishes to acknowledge here...
In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.
Are all your devices connected to the BT HH? If they are then try connecting them to a switch, the HH can have issues with Multicast, not saying this is what you are getting but if you have a spare switch to try it is worth having a go.
MD600 to switch to ethernet-over-power to ethernet-over-power to PC
with the BT broadband router also connected to the switch and BT wireless router connected to the BT broadband router. So I have kept the BT stuff out of the chain as much as possible.
The problems continues on a predictable 15 minute cycle.
I have raised it via PM with my PP for Meridian's attention.
Thanks for your thoughts and suggestions as always.
In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
