If listening to a DVD like Roy Orbinson Black and White Night, where the DTS channel separation is fantastic across the 7 speakers, Roy's sublime voice became much more prominent from the SE centre speaker, the rest of the musicians very much taking backstage positions on the other speakers as they should.

Listening to Eva Cassidy's Time after Time album from my MC200, again there are now fantastic crystal clear vocals from the centre speaker - so much better than my original non SE 5200, with the 7200SE's responsible largely relegated to instruments and background vocals.

Bizarrely and much too my surprise, I actually found the 5200SE was perhaps making too prominent a contribution to the front stage. Before the upgrade I was concerned that the opposite might be true, that the 7200SE's would overpower the 5200.

Consequently I used for the first time the centre elevation feature on the 5200. That allowed the centre speaker
to better blend in and work in harmony with the bigger 7200SE fronts (probably not the original intention of that feature but it worked well for me). In my original setup, with 5K fronts, the tweeters were all at the exact same height, so I assume this axis shift on the centre brought better the 3 speakers into better alignment?

That aside, my point really was that previously the non 5200SE centre was less prominent and I put the marked improvement down to the SE upgrade.


Rm1: 861v8, 2xDSP7200SE, DSP5200HCSEU, 2xDSP5200, 2xDSP33, MC200, 218, 271, NAD M17, Panasonic DP-UB9000 Blu-ray,
Sony VPL-VW790ES projector
Rm2: 561, 3x DSP5000 (18 bit)
Rm3: 218+Farad PS, 2x SE7200SE
Rm4: 218, 2x DSP5200.2
Spares: G61RSL, 3x DSP5000, 2 x DSP33