if the EDID is correctly sent by the display device the output resolution will always be the same: the one from the plasma or DLP.
The main problem is obviously the EDID
The second problem is that effectively we cannot say to the Meridian scaler manually what we exactly want to be outputed by the HDMI output.
because obviously if the plasma is sending correctly the info, the G9x will send the required signal. I think M should provide a manual adjustment like : H:1366 V:768 freq:xx Hz
so that even if the EDID is wrong the info is still sent at the native resolution for the panel. I've told them but didn't have much of the clear response. it cannot be that difficult. it should only be software design. they are well aware EDID problems in a lot of display devices even on Pio 434 apparently there is different batch of them that do not provide the right EDID, some others do but obviously pioneer will not comment....