If you are daisy chaining the subs off the DSPs and using a processor, you have to tell it that the speakers are full-range so they get fed all the bass. The speaker then applies filters to reduce the bass of the speaker, the full range signal is then to the subs which apply their own LPF.

You can only set the sub filter for one stereo pair of speakers (i.e. not each speaker independently) but you can set the levels of two Meridian subs daisy-chained off that speaker pair independently. It is really quite flexible and intuitive and you don't need a controller to do any of this.

If you use a controller to do the sub filtering you can still do some/all of the above as well.


In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.