I've just scanned the 818 user manual. From what I can see the control of subwoofers is limited to DSP models over SpeakerLink. If you remove the 568 I can't see how you would integrate volume control between the DSP5000s and an analogue (or even digital) fed DSP device controlling the subwoofer.

So, going back to your original question which was (paraphrasing) "would adding a sub to your DSP5000s be a reasonable alternative to going for larger DSPs?" but now considering it in the context of no 568 you really have two choices: adding Meridian DSP subwoofer(s) or going up the DSP speaker hierarchy. And, much as you/we would like some form of room correction in the 818, it isn't there now so is not relevant to the argument.

In your setup, the DSP subwoofer would be integrated over SPDIF with the DSP5000s being configured to (coarsely) set the cross-over level; the volume being set at the subwoofer itself. This is a low cost experiment for you using either two D1500s or one D2500. The D2500 worked very well for me with DSP5000s but I would go for two D1500s if it was me, starting with one to get an idea of the benefits and issues.

Would that be better than a pair of DSP6000s, ignoring the DSP5200s which you don't like and the DSP5500s and DSP7000s based on their un-heard-by-me rep for floppy/heavy bass? Only you in your room can tell that but the migration path is more expensive and more risky if you didn't like the result.

I went from DSP5000/D2500 to DSP7200s. Expensive yes but the benefits in the rest of the audio band are there to be heard. And that is with a 568.2 being the controller, not an 818. I think you owe it to your 818 to let it show what it can do with better DSPs; DSP6000s at least.

IMHO, YMMV, M2C, etc.


In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.