Originally Posted by 3dit0r
Originally Posted by EllisDJ
Not sure their explanation quite holds water - in order to find the quarter wavelength, you have to calculate it from the bandwidth of the signal - in digital audio transmission, wouldn't this change according to the bit/sampling rate, etc? So wouldn't this mean you'd have to use a different cable for 16/44.1, 24/96, etc, etc?

Below a certain length, given a certain bandwidth, the cable is not acting as a transmission line anyway, is it?

Not sure the initial explanation is aimed at digital - I didnt expect any improvement for digital over their standard cusat cable - but the difference is there.

Both for linking HD621 to G61 (smaller difference but still a difference and for linking then ms600 now audio pc to G61 a very big difference.

All my music was 88/24 obviously so the design wors well for that sample rate.
I now have all my music 96/24 and it works equally well.

There are not many cables out there I have seen that are designed this way - that's what gives them an edge I feel and they are worth demoing 100%


861v4 LPSU, HD621, Bryston 9BSST
KEF Reference 3 and 2c, 2 X SVS SB13 ULTRA
Audio PC: JPLay, LPSU, JCAT, PPA Studio
Cables XLO Limited, Unlimited Edition and Signature
Sony VW500 Isotek Titan, DIY Mains and Clean Signal Earth Solution