Hi,

After step 2: "Type" the newly flashed processor.
It would be wise to power off/on the 568 and see what the display displays.

I'm not convinced that the 2.5 firmware has loaded correctly and this is why you are see �Bad Software� error message.

I suggest that you go back to Step 1: and re-flash the firmware then:

Power 568 off/on & check display.
Retype 568 & check display.
Power off/on & check display.

Report back, on what you see.


Regards,
Carl

861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)