Originally Posted by Ken
1. SSP set to 80 hz. IT is performing bass management.
2. All channels go from SSP to QSC. Output of QSC go to the amps.
3. Speakers are set to small all around in the SSP.
Thanks for the info. And the QSC is doing room EQ? Are there specific EQ filters the SSP could not perform using its native EQ, like MRC in the 861 (in other words, is the QSC necessary for performing the EQ)?

Originally Posted by Ken
This whole thing is ridiculous.
Not really. We have just confirmed that your setup is not getting the max out of your SSP, not matter if this is a 861, ADA, Lexicon, Tact or whatever fine high-end surround processor you would use. The QSC determines the sound quality and characteristic. As George already stated many posts before, you have a QSC system with a SSP as source.