5.3 is when the "sides" outputs are configured for left and right subs as well as the mono sub; this is just another way of adding subs and is documented in the manual (well it is in the 565 manual I have handy).

I tried a mono sub with my front stereo pair, i.e. daisy-chained off the front L/R SPDIF and the switch selecting 1/2. Then set sensitivity by ear, trying to get balance and slam not boom. There is also a parameter in the DSP5000s menu to set the output to work with a sub but I didn't go there.

Re the 75dB question, no you can't make that assumption for a bunch of reasons as it depends on room position, speaker and processor parameter settings, etc. I wouldn't fixate on 75dB, personally I go for the minimum digital attenuation on both my analogue and digital systems. On the digital system that equates to SPL readings of 82dB.

To be honest I have slightly lost track of where we are now; making it work or making it better, apologies. If this was my conundrum I would start from the calibrated 7.0 system and make one sub-woofer change at a time, tune the level by ear then assess for your preferences using a known and relevant source. So add a single .1 mono and listen, add the two daisy-chained for the .1 mono and listen, add the two to the FL/FR for a subless solution with subs and listen, etc.

My preference for quick testing bass is Gladiator. Try the DTS track when the trebuchet (?) is fired in the battle at the start and when the chariot crashes in the arena. Then there is the TRex in Jurassic Park, the broadside in Master and Commander, etc. etc.

Then there is your on-board MRC which is a whole new world of tweeking.......


In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.