Tony, you can daisy chain the comms from any speaker. The SPDIF must come from the relevant stereo SPDIF feed (front, sides, rears, centre/sub).

For your Option 1, connect the SPDIF to the main L/R and set the switches as I suggested.

For your Option 2, I am not sure of the settings/connections for the rear but I am not sure that this would work because the rear sub would need to connect to the rear digital outs and doesn't use a separate channel and I'm not sure you can mix analogue and digital like that. Does the G68 have an option that the 565/568 don't?

For your option 3 then the second sub daisy-chains off the first.

I suggest you wack the volume up to full on the subs while you are testing the layout works, then calibrate afterwards.


In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.