I recently purchase (3) DSP3100, that I would like to use as left, center and right speaker, in a minimal surround system. I`m trying to avoid having to buy a Meridian controller/processor (no money and I`m not really interested in processing the signal), and keep the setup as simple and straightforward as possible.
All my sources are digital, some are two channel only (Lossless music files from iTune on iMac via optical cable), some are multichannel (Samsung DTB-H260F digital HDTV tuner, Samusung BD-C6500 Blu-ray Player).
Everything is connected to an auto switch (Octava HDS4-V13, 4x1 HDMI Switch with SPDIF Digital audio Routing).
Reading the Meridian manual of the DSP3100, I understand how to create a simple TWO channel system, by connecting the left (or right) speaker to the SPDIF out of the Octava, as a MASTER, then from the digital OUT of the first speaker to the other speaker digital IN.
My question is: if a DSP speaker is able to isolate the left or right channel for a digital signal, and reproduce either one or the other by selecting it with the remote control, why cannot that speaker be able to isolate also the other channels of a surround signal (5.1 or 7.1), and selectively play any of them?
I`ve been reading posts about how to split the digital signal from a HDMI source into (3) or (4) SPDIF - with mods from Shawn, a Meridian HD621, etc - but I was wondering if the speaker itself wouldn`t be able to do the job?
As far as I understand, the posts mentioned above are actually discussing how to extract an UNCOMPRESSED digital signal from each surround audio channel of a HDMI source. But I would already be happy if I can have the DSP speakers reproduce compressed digital surround signal from SPDIF, without adding another controller/processor and spending another $3000.
I`m not sure all that makes any sense: I`m new to Meridian products, please pardon my naivety and thank you for your help.