Originally Posted by Dan W
Question: When LFE is routed to Large speakers, is it "summed" or is it "mixed".

The former makes no sense to me and the latter seems the only logical approach.


Also, with regard to the LFE level, in DD this channel is recorded 10dB lower than the main channels, so it requires a +10dB increase, just to get it back to reference level. Or am I mistaken in this?

Dan

Summed is the same as mixed! If I take two channels and mix them in digital in a NLE on my PC I will have gain if both channels are playing the same frequency. What does happen with DD at least is there is some compression that takes place when the channels are combined into a two channels but the level does drop for added headroom. Actually when watching DD audio movies on SAT or Cable change the DD bit stream to 2 channel PCM in the SAT or cable receiver and the average volume will drop. This is why when watching TV sometime the commericials get loud. Two channel audio on commercials is played back much higher and the DD sound is reduced for headroom when mixing all the channels into two. At least today with HDTV it's all DD so it isn't a problem so much any more. Although I still hear it on the non HD channels on DirecTV from time to time. If you have a full 5.1 system there is no shift in SPL because each channel can play back at the level they are suppose to play back at. My LCD panel in my living room has a feature to keep SPL level even during commercials. Works great!


HT: 568.2mm (Revelation One filter), 518x2, SB3, Bryston 7BSTx3, 8BST, Aerial 10T, CC3, SW12(Qty2) w/SVS AS-EQ1, MK Tripole x4. JVC RS1u, DVDO Duo, Oppo 103 w/Vanity103HD, Sony PS3, VIP 3D Theatre, Acer H5360. Logitech Ultimate Remote and Hub.