Originally Posted by ncpl
Hi Tom,

No that's not the case if you have MRC or any other calibration or tone adjustment.

However, it should be the least processed.

I always found (568.1, 568.2mm and G68) that any processor vs spdif direct to DSP was different. What George has uncovered is a big reason why that is the case.

Correct. It was the HD621 that tipped me off something was not right.

With HD621 it sounded the same as direct wired. No better, no worse, no different.

But with G68 it lost something. What's different?

Speaker calibration.

So I effectively defeated speaker calibration in front.

Now g68 is no better, no worse, no different in direct DSP mode than wired. Just like the HD621 (which does much of what a G68 does but has no speaker calibration).

You need to get this right before thinking about what upsampling, resolution enhancement, apodizing, jitter reduction does. This is more important than any of that imho.

Understand that Meridian operates (processes) around the 16-18th bits. You don't muck with bits higher. And you can muck with bits lower all you want but you won't hear it. First thing Meridian does on a ht processor calibrated by the book is throw out one of those bits !!


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2