I just thought of where some secret answers may exist.

In a G91 smile

The G91 has a dumbed down set of processing. Which includes NO adjustment for center channel boost. My hunch is, it will not have the 3dB offset. If this is true and it supports bass management, Trifield etc. it will help confirm that it's in there just for for allowing center boost in presets.

If the offset is there in HT mode, my guess is when you switch to 2 Channel mode it won't exist because Speaker Calibration is removed and everything will be proper dBFS. But I suspect it's not there in HT mode as well.

Problem is my G91 is at my Lake house and I may not visit there for a bit to check it.

I also think I figured out how Meridian can detect clipping in 518 or (newer) DSP Speakers. All that have to do is look for significant runs of "Flat topped" peaks.

Anyone could check this. You only need an SPL Meter and a reference source like a SqueezeBox and Compare levels through G91 in HT Mode with 2 Speakers(calibrated to 0) to Connected Direct to DSP Speaker. And also compare G91 in 2 Channel Mode. With DSP Speaker kept at the same level. My guess is they will all be the same.

Another test folks could do on normal processor and Matrix Display DSP Speakers is push the +3dB much further using my tool (say +12dB). Then put your processor in Party DSP Mode and see if Clipping lights come on. Then put it back to +3dB and see if the Clipping Lights stay off. Occasional is not a big deal. I only have Matrix Display speakers on my system at the lake house.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2