Originally Posted by Mr Meridian
I've ignored 75dB calibration point for years and kept all the DSPs as high as possible by calibrating to the level of the lowest measured speaker at 0dB adjustment.
+1

Mentioned this back in 2002 or so

I'm also Wired for Direct 2 channel and fluctuate backwards and forwards between Direct Connect 2-ch and Trifield thru 861 depending on my preference with that particular music. I do have a pretty good centre that does add a lot in Trifield for some Vocal material, so my 2-ch listening is about 50 to 60% using Processor, the rest being Direct to Speakers

Meridian have obviously chosen the wrong compromise here, but they have always said to play around with the Calibration, Distances and various other settings until you achieve the sound you prefer. I guess some have taken this further down thru the years than others. It was likely around 1997 since I last went with Meridian's Default Settings, Distances or Calibration recommendations

I firmly believe that the focus now should be on determining WHO should bring this to Meridian's attention and HOW to get a Prompt Response regarding their Rationale. They deserve their day in Court before we pronounce them "guilty"


-