|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
Hi Jaco Just rethinking about the 511 slave patch-- with all the front speakers being SL there is no slave return comms via S lead so it may not work. The best option will probably be a BNC connector onto one end of an S lead for the non SL speakers. Anyone with SL speakers please jump in if this is not correct.
Joe
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210. Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: Dec 2000
Posts: 218 Likes: 2
Hitchhiker
|
|
Hitchhiker
Joined: Dec 2000
Posts: 218 Likes: 2 |
jaco
Joe is correct as I have a simplified version of your system (front all SL; rears Din) and have the following:
1) Front R (Master SL) to 861v6 via SL 2) Front L (SL) to Front R (via SL) 3) Centre (SL) to 861v6 via SL 4) Rear R (Din) - 861v6 SL to AC12; Hacked (BNC conversion) at 861 end S5 to speaker 5) Rear L (din) S5 from Rear R
This is non-intuative and a pain because of the comms changes but does work.
Best
GP
Meridian Owner since 1991
|
|
|
|
|
Joined: Mar 2005
Posts: 162
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2005
Posts: 162 |
OK to those that have got these AC12's - which im also going to need a couple quite soon. Just to confirm to - have a long lengh of CAT5/6/7 cable & then a short bit to the speakers- which i presume we can try to get from M? This I would be imagine to be the optimum solution, as one would want to keep the balanced signal for as long as possible? Or have you guys just used the existing M cable & chopped off the DIN to BNC?? Im sorry if this cable lenthg issue has been discussed in the thread somehwere - i could not see it!!
861v6+ID40, 800D, QNAP269L, 7200SE, PS3, Panasonic PTAE-3000. Richard Gray Power supplies & Harmonic Technology/Transparent Audio/Wireworld Audio & Power cables.
|
|
|
|
|
Joined: Dec 2000
Posts: 218 Likes: 2
Hitchhiker
|
|
Hitchhiker
Joined: Dec 2000
Posts: 218 Likes: 2 |
I put in new M SL cables to the front 3 (3x5m runs) and used my existing S5 (8m) for the rear (cable buried so change not easily feasible). This means my AC12 is at the processor end so I have:
861v6 SL (1m) to AC12; modified S5 to rear set(8m).
I worked on the assumption that the rears don't get a lot of activity anyway so staying unbalanced using the existing cable wasn't going to be much of an issue.
Best
GP
Meridian Owner since 1991
|
|
|
|
|
Joined: Sep 2009
Posts: 5,364 Likes: 2
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Sep 2009
Posts: 5,364 Likes: 2 |
This whole situation, and the expense of the box, makes moving to a SL processor within an SPDIF system so unattractive, I am sure they will loose sales of the new processors. It would certainly make me think twice about buying even the modest G61RSL, which otherwise would be quite attractive.
Ex-moderator Sitting room: dCS Network Bridge, 818v3, HD621, 8kSE Library: dCS Rossini Apex DAC/Clock, Clearaudio Performance Wood, Audio Research PH2, Mjölnir KGST, Mjölnir PureBipolar SWMBO Room: 210, D33 Kitchen: Meridian MS200, Genelec 6010 actives Mobile: Audioquest DragonFly Copper, Sennheiser IE600 Desk: Merging Anubis Server: Roon/ROCK/NUC Headphones: Stax SR-X9000, Stax SR-007, Stax SR-404LE, Audeze LCD-X...
Oldest audio file: 1889 Edison cylinder
|
|
|
|
|
Joined: May 2000
Posts: 2,307
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,307 |
It depends how the dealer helps customers. I think mine will help me to make it work. Distributor thinks i have the right cables, but i doubt it. I will just connect cables and call dealer if it does not work. I am sure he will get the right cables.
Sold all M equipment
|
|
|
|
|
Joined: Sep 2002
Posts: 342 Likes: 3
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2002
Posts: 342 Likes: 3 |
This whole situation, and the expense of the box, makes moving to a SL processor within an SPDIF system so unattractive, I am sure they will loose sales of the new processors. It would certainly make me think twice about buying even the modest G61RSL, which otherwise would be quite attractive. I know this whole AC12 thing has been frustrating but I wouldn't let this situation discourage you from purchasing as I think M will work out the bugs. Sometimes jumping on board early on new equipment means paving the way to smooth out the road for everyone else. I personally feel M was being generous in offering the upgrade at all-especially since I've owned the 861 for 7 plus years and I may have waited but wanted to make sure I got in on the upgrade before it ended. Joe
My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210. Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus
|
|
|
|
|
Joined: May 2000
Posts: 2,314
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,314 |
Best regards, Jerry Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.
|
|
|
|
|
Joined: May 2000
Posts: 2,307
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,307 |
so now the distributor will swap 2 S5 (out of the 4) for 2 M5 cables and than thinks it will work. I will have my soldering iron, cinch connector and BNC converter handy once i start connecting this 
Sold all M equipment
|
|
|
|
2 members (SpaceJS, Phil Floyd),
336
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,257
Posts297,501
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|