Originally Posted by Ronomy
I thought of a way to test this! Using a 518 connected to the 568 digital output while in analog output mode. Use the 518 to monitor digital full scale (it has a clipping indicator). I have an RCA test disk with full scale test tones. I can monitor the digital output as I change volume on the 568 and see how the digital output behaves. I can use the gain on the 518 to see what the offset is as I change volume. I'll just turn my amplifiers off and test away.

Ron

Keep in mind the Digital Outputs work different in Analog vs Digital and it may not accurately represent what is going to the DACs. You would hope it doesn't because it's pure digital attenuation on digital outputs when in analog mode.

But in digital mode the 518 might help monitor things.

I'm not sure how the 518 knows something is clipping unless it clips it, itself.

It could tell you that you are full scale though and might be what it does because I don't believe material is normally full scale.

There are clipping indicators on DSP speakers too, only the modern DSP speakers with Matrix displays have them.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2