Also if the volume and speaker trim output is after internal processing as I believe it is the volume is probably in a 24 bit format for the analog DAC's and the DSP speakers (DSP's set to full output of course) and in an analog setup once my volume control hits digital full scale the analog volume takes over. Trims set to -5 is not a problem for analog. I am sure below a certain digital volume analog kicks in again. The -4 or -5 setting I use is probably a sweet spot or something in the processing is adding some compression. probably in the volume control in the processor. This doesn't get used in the case of the DSP speaker setups. DSP speaker volume in in the speakers.

You guys seem to think you are changing input bit depth but I don't think you are changing it with the trims. You are changing input bit depth to the DSP speakers but that is after processing of Trifield and any other 48 bit processing! The processor is always seeing full scale input if the recording is full scale. If not that's when a 518 is useful.

Ron


HT: 568.2mm (Revelation One filter), 518x2, SB3, Bryston 7BSTx3, 8BST, Aerial 10T, CC3, SW12(Qty2) w/SVS AS-EQ1, MK Tripole x4. JVC RS1u, DVDO Duo, Oppo 103 w/Vanity103HD, Sony PS3, VIP 3D Theatre, Acer H5360. Logitech Ultimate Remote and Hub.