Originally Posted by Ronomy
George,

Have you ever tried running the G68 in analog with the digital outputs connected to your DSP speakers? I wonder where full scale is setup for analog?

The volume on the G68 or 568 would change the digital volume to the DSP's. No?

I have used digital gain on my 518 for some older CD's that are recorded low. It does work quite well but like I said changing digital gain downward on a 518 and changing the trims in the 568 do not yield the same sound results in an analog setup.

Ron

I would bet if you set a 568/G68/861 to 0dB Calibration (which is -3dB)
And hooked the G68 digital out to any DAC (including DSP speakers).

It would sound very similar to a
SqueezeBox hooked to a 518 set to -3 Gain hooked to that same DAC.

Assuming you set the Noise Shape the same as G68/568/861 (C is the rumor).

When you talk analog with the processor there is just too much we don't know. I'm sure it could be poked at from many sides to figure what it's probably doing in analog as well. But it will always be harder with analog to know what's going on. And likly does not have this artifact at all.

If you set a processor analog, then as you adjust volume the digital outs go up and down. And if you apply offsets, if that changes the digital output or not I'm not sure what it would mean.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2