Hey Meridian already documented the purpose of this Tweak in the 518 manual smile

Here it is straight from 518 manual Page 19. With my bolding and coloring.

Quote
Volume Control
The 518 does not provide the main system volume control in Resolution enhancement (Type 1) mode.

If the 518 is used with other Meridian controllers like 565 or DSP loudspeakers, they will provide the volume function and the normal Meridian 0-99 volume number display.

In Resolution Enhancement mode, 518 does provide secondary gain control which allows you to maximize the resolution of downstream-processors and DACs by raising each piece to full digital code.

This function is called 'Gain' and does not follow the system volume control.

In our case the "downstream-processor and DACs" is Meridian DSP speakers and the 518 is the G68/568/861 (in Resolution Mode). This "Gain" control has always existed. It's called speaker calibration. And Meridian always applied a -3. Plus what ever you decrease each speaker by. Basically a 518 on each channel starting at -3. So when doing Speaker calibration. Think of it as a 518 Gain control on each channel and 0 is really +3dB. And you can adjust it where you like. If say your music was overly attenuated (digitally) you could even go beyond +3dB to bring the music up into the sweet spot of your DSP Speaker DAC. But since it's not as convenient as a 518 to adjust on the fly (per album). I'd stick with "FLAT" (Full Scale) in front. Which is +3dB.

Last edited by George Mills; 2010-04-12 19:40. Reason: More detail in last paragraph

- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2