Originally Posted by GGA
I tried the +3dB with my Meridian 568.2mm. I am happy with the first round of listening and will continue to listen long term before switching back.

I am using external dacs and volume controls with the 568. Does +3dB represent Full Scale of the 568? IOW is it possible in my situation to try even more gain?

Thanks,
George #3

Did you verify with a Meter that the +3dB is actually being applied.

And does +3dB display on the 568 Front Panel in the Calibration.

Curious also if you can adjust calibration up and down from the Front Panel (like I can on G68).

Yes +3dB is now FullScale.

I would not push it beyond +3dB unless you can measure it like I explain in the Wiki Article. I highly suspect all the processors are the same.

There is no "real" content to fill in the bottom end with so you would not gain anything going above FullScale.

It's not a huge deal to let rears/sides go a LITTLE above 3dB because they are rarely full scale. But you don't want to let the Front speakers Clip as they are much more likely to receive fullscale data and are much more critical.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2