By the way if folks are still following the back and forth between Steve and I and if you wanted to any these tests (or understand them) then read on.

It is FAIR game to turn up the volume on the DSP Speaker to hear these low level bits. That's the thrust of the whole topic.

How much can you attenuate digitally and still bring it back audibly in analog amplification.

This is IMPORTANT to understand (in the context of the 3dB tweak).

So let's say you take a test signal (like the FLAC I used to do +3dB testing).

Choose a modestly low volume on DSP speaker, say 40 (this will give us 60dB of analog headroom).

Now lower it on SqueezeBox until you just barely hear it (probably on the order of -10dB). You could even use a meter !!

Now lower it 3dB more on the squeezebox and raise the DSP 3dB.
You want to lower more than 3dB and then raise DSP by same amount.
So it clearly goes away in digital and amplifies back in Analog.

Now your listening to the DAC resolve better than your ears or your room can (And there by taking those out of the equation).

Now lower it 3dB more on SqueezeBox and raise DSP speaker 3dB.

Keep going until you can't get the signal back by raising the DSP speaker 3dB.

Now you are at the resolving limit of the DAC (Approximately).

You could do the test above in any increment it will just effect your precision. 6dB may be easier.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2