Originally Posted by Steve Eyles
George is correct.

Resolution enhancement can be added in two ways;

1, Pad the least significant bits (LSB) with zeros (this is what SPDIF looks like anyway because it's always 24 bits)

2, Use DSP to re interpolate the LSBs, effectively smoothing the steps between them. (16 to 24 bit will add 256 extra steps)

Reducing the signal by 6dB is equivalent to reducing the word length by 1bit, BUT the reality is that the signal is still 24 bits and any further DSP is done with 24 bits of accuracy (or more depending on the DSP engine)

The problem here is trying to understand digital signals, bits and dBs. You can't take away 0.5 bits, but you can take away 0.5dB.

My thinking is that the +3dB and -3dB settings allow the original signal to be bit perfect in the MSB due to the -3dB processor offset, in effect making the signal 0dB or -6dB and -6dB is very easy maths, the whole word can be shifted 1bit towards the LSB.
For signals up to 23bits, no actual information would be lost, for 16bits there will be no loss at all.

Steve.

Thanks Steve.

You can do 0.5bits though. The 24bit value is really 48bits internally (floating point I believe) they subtract 3dB (or even 1dB, what ever) and dither it. I don't know if dither is done before or after it's converted back to integer.

This is why I did the +2.5dB test. The math is fine (no audible harm).

It's the loss of MSB bit(s) that I believe is causing the difference.

I thought doing an "even" bit would help too. Which it partly why I used to run at -3dB. But 0dB (in MConfig) was better (and some folks were indeed doing that). But +3dB is optimal. I always knew +3dB was the real 0, but didn't know it was reachable.



- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2