Originally Posted by robert.w
"When Meridian says Resolution Enhancement (16 to 24bit) their may be now some new data in the low bits (from dithering and processing) but they are still VERY low level bits (most insignificant ones). The top 16 most significant should be more or less be the same."

couldnt be true.

What you describe here is leave the top 16 bits the same and only add artificial bits from dithering,processing in the lower 8 bit from a 24 bit word.
Sorry George, but that is complete unlogical for me as the signal then have on the top 16 coarse steps(the original 16bit from full signal to zero) and then you will add 8 bits more BELOW (the original 16bit) zero ?

George is correct.

Resolution enhancement can be added in two ways;

1, Pad the least significant bits (LSB) with zeros (this is what SPDIF looks like anyway because it's always 24 bits)

2, Use DSP to re interpolate the LSBs, effectively smoothing the steps between them. (16 to 24 bit will add 256 extra steps)

Reducing the signal by 6dB is equivalent to reducing the word length by 1bit, BUT the reality is that the signal is still 24 bits and any further DSP is done with 24 bits of accuracy (or more depending on the DSP engine)

The problem here is trying to understand digital signals, bits and dBs. You can't take away 0.5 bits, but you can take away 0.5dB.

My thinking is that the +3dB and -3dB settings allow the original signal to be bit perfect in the MSB due to the -3dB processor offset, in effect making the signal 0dB or -6dB and -6dB is very easy maths, the whole word can be shifted 1bit towards the LSB.
For signals up to 23bits, no actual information would be lost, for 16bits there will be no loss at all.

Steve.