The settings for our processors have max driver size calculations and max SPL settings. Clearly Meridian has some sort of dynamic compression going on.

I found that even if you check off max for large speakers that the original size setting is copied into the MSF file. Before you select small speaker if you set the number to max and then select small it will be set to 31 in the analog setups which should be max but there is also a max SPL setting. I set that to 120db. This compression may still have an affect and lowering the speaker trims seems to minimize the compression. That is what I think is happening...at least in my analog setup. This isn't hoodooish to me. It's clearly heard every time I make the change for the last 8 or more years.

I am looking forward to hearing Georges system. I might try pushing my analog trims to +3 and see what it sounds like. i think I tried that once and the sound was harsh more in your face sound stage.


HT: 568.2mm (Revelation One filter), 518x2, SB3, Bryston 7BSTx3, 8BST, Aerial 10T, CC3, SW12(Qty2) w/SVS AS-EQ1, MK Tripole x4. JVC RS1u, DVDO Duo, Oppo 103 w/Vanity103HD, Sony PS3, VIP 3D Theatre, Acer H5360. Logitech Ultimate Remote and Hub.