logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rating: 5
Page 8 of 9 1 2 3 4 5 6 7 8 9
Joined: Nov 2001
Posts: 691
Likes: 4
Formerly Meridian506
Paranoid android
Formerly Meridian506
Paranoid android
Offline
Joined: Nov 2001
Posts: 691
Likes: 4
Has anyone tried -3dB for the DSPs? I couldn't find anything mentioned in this thread about that, but in total that would equal a whole bit and you wouldn't run the risk of clipping. I'm going to try and find time tonight to play with the +3 and -3, as either way it's a cheap upgrade!


Living room: DSP5000.3
WFH Office: M33
Bedroom: P200ZQ
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
I've been running -3dB for years. Thinking that was as close as I could get because it was exactly 1 bit down from +3dB. Then I figured out how to get around it.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by robert.w
Thanks for the brake,
but I think my english is slightly better than your german;-))
Dit i was unpolite or what?

What I mean,if direct plug in the DSP sounds the same as with the +3dB via the prozessor as you posted-
then there should be not difference at all.
And if there is no sound differences, then what is doing the prozessor ?
I know it can upsample and can make 24 bit resolution,
but when you hear no difference-what is left?
Can you explain that,please?

I don't know. Remember I'm deaf.

I don't hear upsampling, HD621 (applied to CD), Axis or the differences between 320kbs MP3 and lossless FLAC, or optical vs coax etc. etc.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Nov 2001
Posts: 691
Likes: 4
Formerly Meridian506
Paranoid android
Formerly Meridian506
Paranoid android
Offline
Joined: Nov 2001
Posts: 691
Likes: 4
FYI for those with analogue subs:

I've just been altering my config, and although analogue speakers use the same level coding as DSPs the analogue sub apparently does not. At -1dB my sub config was at 0x2a (note that for the other speakers 0x26 is +3dB), and to get 4.5dB displayed in MConfig (my LCR were around -2.5dB originally) I had to set it at 0x35.


Living room: DSP5000.3
WFH Office: M33
Bedroom: P200ZQ
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by meridian506
FYI for those with analogue subs:

I've just been altering my config, and although analogue speakers use the same level coding as DSPs the analogue sub apparently does not. At -1dB my sub config was at 0x2a (note that for the other speakers 0x26 is +3dB), and to get 4.5dB displayed in MConfig (my LCR were around -2.5dB originally) I had to set it at 0x35.

Frank noticed subs were different too. I suspect it's the same for analog or digital subs the hex value is encoded differently. But the delta change you have to make I believe is the same.

Be sure to verify in MConfig, Front panel and with a Meter that everything is as you intented.

Oh, if it's an analog sub you should be able to bump it up positive enough in MConfig. Analog is not capped at 0.0db.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Jan 2004
Posts: 2,474
Likes: 18
Senior Shouting Officer
Senior Shouting Officer
Offline
Joined: Jan 2004
Posts: 2,474
Likes: 18
I'm not sure there is such a mystery. The 3dB headroom has to be there when you have "small" speakers or perhaps even the LFE to mix into the "large" speakers.


DSP8000SE, DSP7200SEHC, DSP5200SE sides, DSP7200SE rears, 861v8, 210, Sim2 Ultranero 4, Stewart Cinecurve 2.35:1, XEIT CM-5E Anamorphic lens, Dune HD Duo Cinema 8K and Wireworld Platinum 48G HDMI -> UHD722 -> Shunyata Omega Ethernet. Shunyata/Furutech power-cables/filters. SR Master Fuse@861v8. Uptone Etherregen with 10MHz OCXO clock.
Joined: Dec 2000
Posts: 866
Likes: 2
Pan-dimensional being
Pan-dimensional being
Offline
Joined: Dec 2000
Posts: 866
Likes: 2
I did some more testing and I have to say it is remarkable. The thing that keeps bugging me however is that there is now no headroom left at all, so if there is any processing in the G68 that needs even the tinniest bit of headroom (bass management, mrc, Trifield) we are basically screwed. I can not imagine that (digital) clipping is healthy for the speakers.

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
If you turned your center up +3dB in the DSP Preset(s) you'd have the same amount of headroom left.

l believe it's there for one of 3 reasons

1 Center Channel boost above mains in DSP preset
2 Headroom for Rounding errors in processing of any kind
3 Someone screwed up and shouldn't be there

I believe it's #1

But even if it was 0dB that sounded better instead of +3dB (or -3dB) this small change shouldn't cost so much at any offset.

So independent of #3 does the code that applies an offset have a bug? Or is it well understood it is costly to adjust volume digitally (which is why hybrid volume exists in DSP speakers).

My gut feeling is it's a bug in implementation of the offset code and we are bypassing it.





- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Mar 2010
Posts: 366
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2010
Posts: 366
George,

I found your investigation/thread quite interesting! Thanks for share.

But there is something I do not find or I am not sure to understand... I use a 568 (561 before it, now 561 on the basement system) with full analog output, or alternatively with full analog less the main L, R on digital (to a 808.2i and then into power amp).

Nothing of your findings apply to my setup(s), right?

That is, I am better on the 'negative side' of things (highest channel level around -3) even when using the digital out for main channels... Or am I wrong?

Thanks again and best regards,

Josep


Basement: Linn Sneaky DS, 568.2mm, ARS Sonum Gran Filarmonia, Ramallo Allegro.
Living Room: 602, Linn Akurate DSM, Hypex Nc400, B&W 802D.
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Josep,

I don't think this applies to analog. But since we don't have the code to see how it works and never will it's hard to say.

When I did ran analog on 568 I never did hear the difference Ron heard. I think what Ron may be doing is finding the sweet spot on the Hybrid volume.

The problem with DSP setups is different as it can't take advantage of the Hybrid Volume in the DSP speaker for level adjustments.

Try it. So far, to perhaps all of us that have tried it (6 or so) the difference is not subtle.

Analog systems may not have the problem to begin with. It's difficult to confirm as I did with digital by measurements.

I'll eventually do a poll and I'll toss in analog too.



- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14

Is anyone thinking like I am. How does this effect a 861V6?
If they did discover this "artifact" in 861V6 development wouldn't they back release a fix for 861V4/G68? What if it still exists in 861V6 then what?

Does CAT5 Processors/Speakers address the issue correctly by doing offsets in the Speaker hybrid volume !!!


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Apr 2004
Posts: 12,733
Likes: 88
Don't Panic!
Don't Panic!
Joined: Apr 2004
Posts: 12,733
Likes: 88
What interests me is the calibration offset that Meridian uses in its own listening tests. Does it use 0 or +3.

BTW, is +3 the max possible?


Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.
Page 8 of 9 1 2 3 4 5 6 7 8 9

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
0 members (), 376 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
Ludwig 10
IanP 8
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,249
Posts297,436
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.031s Queries: 40 (0.025s) Memory: 0.6887 MB (Peak: 0.7898 MB) Data Comp: Off Server Time: 2026-11-16 04:07:49 UTC
Valid HTML 5 and Valid CSS