Originally Posted by meridian506
FYI for those with analogue subs:

I've just been altering my config, and although analogue speakers use the same level coding as DSPs the analogue sub apparently does not. At -1dB my sub config was at 0x2a (note that for the other speakers 0x26 is +3dB), and to get 4.5dB displayed in MConfig (my LCR were around -2.5dB originally) I had to set it at 0x35.

Frank noticed subs were different too. I suspect it's the same for analog or digital subs the hex value is encoded differently. But the delta change you have to make I believe is the same.

Be sure to verify in MConfig, Front panel and with a Meter that everything is as you intented.

Oh, if it's an analog sub you should be able to bump it up positive enough in MConfig. Analog is not capped at 0.0db.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2