I have a 568 and only use the analogue outputs in a 5.0 set-up.

Originally, I had the LCR set to 0dB and the rears level matched to +1.5dB

After reading a very old post on levels, I tried setting the levels so no speaker had a positive setting, so LCR set to -3dB and rears set to -1.5dB.
After adjusting the normal playback volume by +3 (to get the same relative SPLs) I think it sounds a better, more relaxed and smoother, like there's less distortion.

Then again, I couldn't switch between the two set-ups quickly as it requires a Config each time. Maybe it's all in my head?

The thing is, technically, reducing the level by a small amount will prevent the possibility of clipping in the digital domain, so my gut feeling is that it should be better.
It also completely rid the system of (admittedly rare) pops and clicks when changing sources / muting etc.


Originally Posted by George Mills
I don't hear AXIS changes.
I don't hear upsampling in G68 (or 861).
I don't hear differences in G68 and 861).
I don't hear cable differences.
I don't hear power conditioner differences.
I don't hear a lot of things, like changing dither and bit depth on the 518, maybe the change is so small as to be not important? Maybe my system can't resolve the differences? (welcome to upgrade paranoia)

As for hearing the differences between 24 and 23 bit sources, I'm still waiting for any piece of equipment to have a dynamic range of 144dB, a room with 0dB background noise and ears that wont bleed with SPLs over 130dB...

Steve.